Connecting Gnss (Gps) And Vhf Antennas - Raymarine RAY90 Installation & Operating Instruction

4.9 Connecting GNSS (GPS)
and VHF antennas
The radio must b e connected to suitable GNSS and VHF
antennas (not s upplied). The antenna connections must
be protected so it c annot c ome into contact w ith any
grounded bare metal.
Pre-requisites:
• Ensure you have installed your a ntennas in
accordance with the instructions supplied with the
antennas.
• Ensure the cables have been properly routed to
the Base station and that s ufficient c able length is
available to mak e the connections.
1. Plug the antenna connector into the relevant a ntenna
connection on the Base station.
2. Secure by tightening the locking collars.
32
81377-1-en_US_PRINT.pdf 32 12/21/2017 9:05:37 PM