Mounting - Raymarine RAY90 Installation & Operating Instruction

Product d imensions - R aymic handset
The Raymic handset d imensions for b oth cradle
mounting and clip mounting are provided.
The R aymic handset i s fitted with a coiled cable. Ensure
sufficient s pace is available below the desired mounting
area to accommodate the cable.
22
81377-1-en_US_PRINT.pdf 22

3.4 Mounting

Tools required for i nstallation
P 1. ower d rill
2. Pozi-drive screwdriver
3. Adhesive tape
4. Suitable size drill b it
5. 89 mm (3 ½ in) H ole saw (used for speaker mounting)
6. File (for s peaker c ut-out)
Mounting the Base station
Follow the steps below to mount t he Base station.
Before mounting the Base station ensure that y ou have:
• selected a suitable location (a clear, flat s urface is
required).
• identified the location for a dditional c omponents, s uch
as the Handset o r S peaker e tc.
• identified the relevant c able connections and route
that t he cables will t ake.
1. Using the supplied mounting template
location of t he fixing holes on the mounting surface.
2. Drill h oles for t he mounting fixings using a drill w ith
a suitable sized drill b it.
3. Screw the fixings approximately half w ay into the
holes in the mounting surface.
4. Place the Base station over t he fixings screws and
push down to lock into position.
5. Fully tighten the screws.
6. Connect t he necessary cables.
, m ark the
12/21/2017 9:05:36 PM