Raymarine RAY90 Installation & Operating Instruction page 24

1. Using the supplied mounting template
location of t he cut o ut a nd fixing holes on the
mounting surface.
2. Using a 89 mm (3 ½ in) h ole saw, d rill o ut t he centre
cut o ut a rea indicated on the mounting template.
3. Drill h oles for t he fixings, u sing a drill w ith a suitable
sized bit.
4. Ensure that t he unit fi ts into the removed area and
then file around the cut e dge until s mooth.
5. Peel t he backing off o f t he supplied gasket a nd place
the adhesive side of t he gasket o nto the rear o f t he
speaker, pressing firmly onto the flange.
6. Connect t he relevant c able to the speaker.
7. Slide the speaker i nto place and secure using the
fixings provided.
8. Fit t he Bezel, e nsuring it c lips into place on all 4 sides.
24
81377-1-en_US_PRINT.pdf 24
, m ark the
12/21/2017 9:05:36 PM