Start/Stop Label - SATO CX Series Programming Manual

Command Structure
Start Command:<ESC>A
Stop Command:<ESC>Z
Example:
Placement:
Default:
Command Function
For all print jobs, the Start command must precede the data,
and the Stop command must follow. The print job will not run
properly if these are not in place.
Input to Printer
<ESC>A
<ESC>H0001<ESC>V0100<ESC>WB1SATO
<ESC>H0130<ESC>V0200<ESC>B103150*SATO*
<ESC>H0170<ESC>V0360<ESC>L0202<ESC>S*SATO*
<ESC>Q1<ESC>Z
Printer Output
There is not output for these commands they are not accom-
panied by other label printing commands. However, these
commands must precede and follow each print job sent to the
printer.

Start/Stop Label

Start/Stop Label
Start/Stop Label Start/Stop Label
See above
<ESC>A must precede data
<ESC>Z must follow data
None
SATO CX Series Printer
73