Start/Stop Label - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
Start Command <ESC>A
Stop Command <ESC>Z
Example:
Placement:
Default:
Command Function
For all print jobs, the Start command must precede the data, and the Stop
command must follow. The print job will not run properly if these are not in
place.
Printer Input
<ESC>A
<ESC>H0001<ESC>V0100<ESC>WB1SATO
<ESC>H0130<ESC>V0200<ESC>B103150*M-5900RV*
<ESC>H0170<ESC>V0360<ESC>L0202<ESC>S*M-5900RV*
<ESC>Q1<ESC>Z
Printer Output
There is no output for these commands that are not accompanied by
other label printing commands. However these commands must
precede and follow each print job sent to the printer.
Page 4-76

Start/Stop Label

See above
<ESC>A must precede data
<ESC>Z must follow data
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C