Form Overlay, Store - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>&
Example:
Placement:
Default:
Command Function
To store a label image in the volatile form overlay memory.
Only one label image may be stored in this memory area at
a time.
Input to Printer
<ESC>A
<ESC>H0100<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z
Printer Output
There is no output from this command. It stores the label
image in the overlay buffer.
Special Notes
1. Remember that this storage is volatile. Therefore, if the
2. The overlay is recalled using the <ESC>/ Form Overlay
3. Form overlays do not have to be re-compiled each time
4. The Expanded Print Length <ESC>AX, (See page 55),
40

Form Overlay, Store

Form Overlay, Store
Form Overlay, Store Form Overlay, Store
See above
Must be preceded by all other data and placed
just before the Stop command (<ESC>Z)
None
printer loses power, the overlay must be sent again.
Recall command, (See page 38).
they are called to be printed and therefore may result in
much faster print output.
cannot be used with this command. The maximum
length label that can be used with Forms Overlay is
177mm (7").