SATO CX Series Programming Manual page 28

SATO CX Series Printer
<ESC>V100
<ESC>L0505
<ESC>K1H903F
<ESC>H350
<ESC>V100
<ESC>L1010
<E SC>K1H903F
<ESC>Q1
<ESC>Z
Printer Output:
Special Notes
1. When printing the custom character using the <ESC>K
2. The characters are stored in volatile memory and must
3. Do not use ASCII <CR> or <LF> characters within the
20
Recall command, the character is affected by the follo-
wing commands:
Character Expansion, (See page 21)
Character Pitch, (See page 24)
Line Feed, (See page 50)
Rotate, Fixed Base Reference Point, (See page 66))
Rotate, Moving Base Reference Point, (See page 68)
be reloaded if the printer power is lost.
graphic data or the actual image will not be printed as
specified.