Print Quantity - SATO CX Series Programming Manual

Command Structure
<ESC>Qaaaaaa
aaaaaa =
Example:
Placement:
Default:
Command Function
To specify the total number of labels to print for a given print
job.
Input to Printer
<ESC>A
<ESC>H0100<ESC>V0100<ESC>WB1SATO
<ESC>Q3
<ESC>Z
Printer Output
Three labels containing the data "SATO" will be printed.
Special Notes
1. To cancel a print job, you must turn off the printer.
2. When used with the <ESC>F Sequential Numbering
3. If you do not specify a Print Quantity, the printer will not
4. For this command, leading zeroes do not have to be

Print Quantity

Print Quantity
Print Quantity Print Quantity
Total number of labels to print (1 to 65535)
<ESC>Q500
Just preceding <ESC>Z, unless <ESC>~ Cut-
ter command exists, then preceding that. This
command must be present in every print job.
None
command, (See page 70), the Print Quantity value
should be equal to the total number of labels to be prin-
ted.
print a label.
entered. The command Q1 is equivalent to Q000001.
SATO CX Series Printer
59