SATO CX Series Programming Manual page 66

SATO CX Series Printer
Printer Output
Special Notes
1. The print position of a field is affected by both the Rotate
2. If any part of an image is placed past the maximum
3. If any part of an image is placed past maximum allowa-
4. If you attempt to print where there is no paper, you may
5. For these commands, the leading zeroes do not have to
58
(<ESC>R and <ESC>A3) commands.
number of dots for standard length.
ble dots across the label, that part of the image will be
lost.
damage the print head.
be entered. The command V1 is equivalent to V0001.