Label Tear-Off - SATO CX Series Programming Manual

Command Structure
<ESC>CBabb
Example:
Placement:
Default:
Command Function
To adjust the location of the first print line on the label.
Input to Printer
<ESC>A
<ESC>CB+03
<ESC>Z
Printer Output
There is no printer output for this command. The first print
line on the next printed label will be adjusted after the receipt
of this command.
Special Notes
1. The value is stored in flash memory and will remain until

Label Tear-Off

Label Tear-Off
Label Tear-Off Label Tear-Off
<ESC>CB+03
a = + to move the print line down from the
top edge of the label
bb = Distance moved in millimetres
This command should be sent in a separate
data stream.
Last valid setting.
it is modified by another valid <ESC>CBabb command,
even if power is removed from the printer.
SATO CX Series Printer
99