Start/Stop Label - SATO CL408 Programming Manual

2. Command Codes
Command Structure:
Start Command:<ESC>A
Stop Command:<ESC>Z
Example:
Placement:
Default:
Function:
For all print jobs, the Start command must precede the data, and the
Stop command must follow. The print job will not run properly if these
are not in place.
Input:
<ESC>A
<ESC>H0001<ESC>V0100<ESC>WB1SATO
<ESC>H0130<ESC>V0200<ESC>B103150*M-8400RV*
<ESC>H0170<ESC>V0360<ESC>L0202<ESC>S*M-8400RV*
<ESC>Q1<ESC>Z
Output:
There is not output for these commands they are not accompanied by
other label printing commands. However, these commands must pre-
cede and follow each print job sent to the printer.
92

Start/Stop Label

See above
<ESC>A must precede data
<ESC>Z must follow data
None
Programming Manual
SATO RISC Printers