Line Feed - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>Eaaa
aaa
Example:
Placement:
Default:
Command Function
To print multiple lines of the same character size without spe-
cifying a new print position for each line. With the Line Feed
command, specify the number of dots you want between
each line. Then, send an ASCII <CR> at the end of each line
of text. The printer automatically identifies the size of the last
character, moves down the number of dots specified, and be-
gins printing the next line.
Input to Printer
<ESC>A
<ESC>E010<ESC>H0050<ESC>V0050<ESC>L0202<ESC>S
THIS IS THE 1ST LINE<CR>
THIS IS THE 2ND LINE<CR>
THIS IS THE 3RD LINE<CR>
<ESC>Q1<ESC>Z
50

Line Feed

Line Feed
Line Feed Line Feed
= Number of dots (001-999) between the bot-
tom of the characters on one line to the top of
the characters on the next line
<ESC>E010
Preceding the text that will use the line feed
function
None