Label Size & Start Position - SATO CX Series Programming Manual

Label Size & Start Position Label Size & Start Position
Label Size & Start Position Label Size & Start Position
Command Structure
Line
aaaa
bbbb
Example:
Placement:
Command Function
By using this command you can adjust the label size and the
start position of the label.
Input to Printer
<ESC>A
<ESC>A108000400
<ESC>V100<ESC>H2000<ESC>P2<ESC>L0202
<ESC>XMABCD
<ESC>Q1
<ESC>Z
Special Notes
The A1 command is not stored in the printer memory and
must be implemented in the label job.
For reasons of compatibility, when this command is sent to
the previous model (CX200, CX210) it will be ignored.
<ESC>A1aaaabbbb
= Vertical Label Size, 1-V Max (dot)
= Horizontal Label Size, 1-H Max (dot)
<ESC>A108000400
Preceding the data to be printed
SATO CX Series Printer
47