Repeat Label - SATO CX Series Programming Manual

Command Structure
<ESC>C
Example:
Placement:
Default:
Command Function
To print duplicate of the last label printed
Input to Printer
<ESC>A
<ESC>C
<ESC>Z
Printer Output
A duplicate of the previous label will be printed.
Special Notes
1. This command will have no effect if the power to the

Repeat Label

Repeat Label
Repeat Label Repeat Label
See above
Must be placed immediately after <ESC>A
and immediately before <ESC>Z in its own
separate data stream
None
printer was cycled off and back on since printing the pre-
vious label.
SATO CX Series Printer
61