SATO CX Series Programming Manual page 77

Printer Output:
Special Notes
1. This command is provided for compatibility with other
2. Do not combine this command and the <ESC>% Rotate
3. A custom graphic is not affected by this command. The-
4. See Rotated Fields, (See page 5), for more information.
5. The specified values are valid until another Rotate
6. Receipt of a Stop Print (<ESC>Z) command will reset the
SATO printers. It is not recommended for new label
designs and the <ESC>% rotate command should be
used.
command, (See page 66), in the same data stream.
refore, always design and locate your graphic image to
print in the appropriate orientation.
(<ESC>R) command is received.
setting to the default value.
SATO CX Series Printer
69