SATO CX Series Printer
Command Structure
<ESC>CEa
a
Example:
Placement:
Default:
Command Function
To select the top-of-label sensing method.
Input to Printer
<ESC>A
<ESC>CE1
<ESC>Z
Printer Output
There is no printer output as a result of this command.
Special Notes
1. The <ESC>CBabb command should be used to adjust
106
Back Feed Enable
Back Feed Enable
Back Feed Enable
Back Feed Enable
=
0 Disable Back feed
1 Enable Back feed
<ESC>CE1
This command should be sent in a separate
data stream.
Last setting
the amount of back-feed.