Command Structure
Command Function
Input to Printer
Printer Output
SATO CL Series "e" Printers
Start/Stop Label
Start Command: <ESC>A
Stop Command: <ESC>Z
Example:
See above
Placement:
<ESC>A must precede data
<ESC>Z must follow data
Default:
None
For all print jobs, the Start command must precede the data, and the
Stop command must follow. The print job will not run properly if these
are not in place.
A
Z
There is no output for these commands they are not accompanied by
other label printing commands. However, these commands must
precede and follow each print job sent to the printer.
PN 9001074 Preliminary
Section 5. Programming Reference
Page 5-77