Rotate, Moving Base Reference Point - SATO CX Series Programming Manual

SATO CX Series Printer

Rotate, Moving Base Reference Point

Rotate, Moving Base Reference Point
Rotate, Moving Base Reference Point Rotate, Moving Base Reference Point
Command Structure
Normal Direction:<ESC>N
Rotated Direction:<ESC>R
Example:
Placement:
Default:
Command Function
The <ESC>R command rotates the printing of all subsequent
images in a print job by 90° counter-clockwise each time it is
used. It also moves the base reference point to a different
corner of the print area.
The <ESC>N command returns to the original base refe-
rence point and returns printing to the normal orientation.
Input to Printer
<ESC>A
<ESC>N<ESC>L202<ESC>H0100<ESC>V0010<ESC>MNOR-
MAL DIRECTION
<ESC>R<ESC>H0100<ESC>V0100<ESC>MONE
<ESC>R<ESC>H0100<ESC>V0100<ESC >MTWO
<ESC>R<ESC>H0100<ESC>V0100<ESC>MTHREE
<ESC>R<ESC>H0100<ESC>V0100<ESC>MFOUR
<ESC>Q1<ESC>Z
68
See above
Preceding any printed data to be rotated
<ESC>N