Off-Line/Pause - SATO CX Series Programming Manual

SATO CX Series Printer
Command Structure
<ESC>@
Example:
Placement:
Default:
Command Function
To specify the printer to come to an off-line state. When used
within a print job, the printer goes off-line after finishing the
print job.
Input to Printer
<ESC>A
<ESC>@...Job...
<ESC>Z
Printer Output
There is no printer output for this command. The printer is
placed in the Off-Line mode as soon as the current print job
is finished.
Special Notes
1. You must press the READY indicator key on the front
2. Remember, when using this command, that the print job
3. This command will clear the print buffer.
52

Off-Line/Pause

Off-Line/Pause
Off-Line/Pause Off-Line/Pause
See above
Anywhere in the print job between the
<ESC>A and <ESC>Z
None
panel to return the printer to an On-Line status.
specifies <ESC>Q10, all ten labels will print before the
printer goes off-line.