Form Overlay, Store - SATO E series Programming Manual

Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 2-36

Form Overlay, Store

<ESC>&
Example: See above
Placement: Must be preceded by all other data and placed just before
the Stop command (<ESC>Z)
Default: None
To store a label image in the volatile form overlay memory. Only one label
image may be stored in this memory area at a time.
<ESC>A
<ESC>H0100<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>
&
<ESC>Z
There is no output from this command. It stores the label image in the
overlay buffer.
1. Remember that this storage is volatile. Therefore, if the printer loses
power, the overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall com-
mand.
3. Form overlays do not have to be recompiled each time they are called
to be printed and therefore may result in much faster print output.
Section 2: Command Codes
SATO Programming Reference