Form Overlay Store - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
<ESC>&
Example:
Placement:
Default:
Command Function
To store a label image in the volatile form overly memory. Only one label image may be
stored in this memory area at a time.
Printer Input
<ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>&
<ESC>Z
Printer Output
There is no output form this command. It stores the label image in the overlay buffer.
Special Notes
1. Remember that this storage is volatile. Therefore, if the printer loses power, the
overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall command (see
Page 4-43).
3. Form overlays do not have to be recompiled each time they are called to be
printed and therefore may result in much faster print output.
Page 4-44
Form Overlay, Store
See above
Must be preceded by all other data and placed just before the Stop
command (<ESC>Z).
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C