Form Overlay Store - SATO CL408 Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 4-42
Form Overlay, Store
<ESC>&
Example: See above
Placement: Must be preceded by all other data and placed just before
the Stop command (<ESC>Z)
Default: None
To store a label image in the volatile form overlay memory. Only one
label image may be stored in this memory area at a time.
<ESC>A
<ESC>H0001<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0001<ESC>V0165<ESC>B103100*12345*
<ESC>
&
<ESC>Z
There is no output from this command. It stores the label image in the
overlay buffer.
1. Remember that this storage is volatile. Therefore, if the printer
loses power, the overlay must be sent again.
2. The overlay is recalled using the <ESC>/ Form Overlay Recall
command (see Page 4-41).
3. Form overlays do not have to be recompiled each time they are
called to be printed and therefore may result in much faster print
output.
9001035 Rev. E SATO CL Series Printers