Analog Monitor Output Connector - Cn5 - Delta Electronics ASDA-B2 series User Manual

ASDA-B2

3.6 Analog Monitor Output Connector - CN5

Analog Monitor Output Connector CN5 is used to monitor the motor operation status.
Motor characteristics such as speed and current can be represented by analog voltages.
The drive provides two channels (MON1 and MON2) which can be configured with the
parameter P0-03 to output the desired characteristics.
Please refer to the parameter P0-03 for monitoring commands and P1-04 / P1-05 for
scaling factors. Output voltage is reference to the power ground (GND).
CN5 Terminal Layout and Identification
Signal Cable for CN5 Connector
PIN No. Signal Name
1
2
3
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
3
CN5
Description
MON1 Monitor analog data 1
GND Ground
MON2 Monitor analog data 2
Chapter 3 Connections and Wiring
2 1
Color
Red
White
Black
Wiring Diagram
(Refer to 3.3.3)
C2
3-41