Table 7.2 Output Function Definition (Do) - Delta Electronics ASDA-B2 series User Manual

ASDA-B2

Table 7.2 Output Function Definition (DO)

Setting value: 0x01
DO Name
Servo ready. SRDY is activated when the servo drive is
SRDY ready to run. All fault and alarm conditions, if present, have
been cleared.
Setting value: 0x02
DO Name
SON is activated when control power is applied the servo
drive. The drive may or may not be ready to run as a fault /
alarm condition may exist.
SON
Servo ON (SON) is "ON" with control power applied to the
servo drive, there may be a fault condition or not. The servo
is not ready to run. Servo ready (SRDY) is "ON" where the
servo is ready to run, NO fault / alarm exists.
Setting value: 0x03
DO Name
ZSPD is activated when the drive senses the motor is equal
to or below the Zero Speed Range setting as defined in
parameter P1-38.
ZSPD
For Example, at factory default ZSPD will be activated
when the drive detects the motor rotating at speed at or
below 10 r/min, ZSPD will remain activated until the motor
speed increases above 10 r/min.
Setting value: 0x04
DO Name
TSPD is activated once the drive has detected the motor
has reached the Target Rotation Speed setting as defined
TSPD
in parameter P1-39. TSPD will remain activated until the
motor speed drops below the Target Rotation Speed.
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
DO Function Description
DO Function Description
DO Function Description
DO Function Description
Chapter 7 Servo Parameters
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
All
Triggered
Trigger Control
Method Mode
Level
All
Triggered
7-99