Overload Characteristics - Delta Electronics ASDA-B2 series User Manual

ASDA-B2

10.4 Overload Characteristics

 Overload Protection Function
Overload protection is a built-in protective function to prevent a motor from overheating.
 Occasion of Overload
1. Motor was operated for several seconds under a torque exceeding 100% torque.
2. Motor had driven high inertia machine and had accelerated and decelerated at high frequency.
3. Motor UVW cable or encoder cable was not connected correctly.
4. Servo gain was not set properly and caused motor hunting.
5. Motor holding brake was not released.
 Chart of load and operating time
Low Inertia Series (ECMA C/CM Series)
Revision September 2013
info@varitel.com - www.varitel.com - Tel. (54) 11-4243-1171 / Fax: (54) 11-4292-7545
Manuel Baliña 456, Lomas de Zamora (B1832CCJ) Buenos Aires, Argentina.
VARITEL INGENIERIA ELECTRONICA S.A.
Chapter 10 Specifications
10-9