NEC UNIVERGE SV9100 Features And Specifications page 1397

Program
Program Name/Description
Number
Call Forward Split Settings – CO Call
24-09-02
Forwarding Destination for Both Ring, All
Call, No Answer
Assign CO Call Forwarding Destination for ring,
all call and no answer.
Call Forward Split Settings – Interim Call
24-09-03
Forwarding Destination for Both Ring, All
Call, No Answer
Assign Intercom Call Forwarding Destination
for ring, all call and no answer.
Call Forward Split Settings – CO Call
24-09-04
Forwarding Busy Destination
Assign CO Call Forwarding for busy
destinations.
Call Forward Split Settings – Intercom Call
24-09-05
Forwarding Busy Destination
Assign Intercom Call Forwarding for busy
destinations.
Service Tone Setup – Lockout Tone
80-01-01
(16)
Lock Out Tone Repeat Count.
Out of Range Call Warning Notification:
Program
Program Name/Description
Number
System Options for Transfer – SIP Out of
24-02-15
Range Timer
When not receiving any response within this
timer setting, system determines SIP terminal is
out of range. When set to 0, timer is invalid.
Input Data
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum of 24 digits (0 ~ 9,
#
, @, P, R)
@ = Wait for Answer
Supervision - ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Value 0 ~ 255
Input Data
0 ~ 30 seconds
1397
Default
*
,
No Setting
*
,
No Setting
*
,
No Setting
*
,
No Setting
Default
4