NEC UNIVERGE SV9100 Features And Specifications page 1081

MCU Mode:
Program
Program Name/Description
Number
ETU Setup – Number of Voice Channels
10-03-03
Read only program showing number of VoIP
resources available for voice calls.
This information can also be viewed by
pressing Feature+4 on an idle display terminal.
11-19-01 Remote Conference Group Pilot Number
Enter the pilot number for remote conference.
IP Telephone Terminal Basic Data Setup –
15-05-43
Video Mode
Enable/Disable Video Mode for Standard SIP
terminals.
IP Telephone Terminal Basic Data Setup –
15-05-50
Peer to Peer Mode
On a per station basis enable or disable Peer to
Peer mode.
If enabled, MUC mode resource settings are
used in Programs 84-27-22 and 84-27-23.
Remote Conference Group Setting –
20-34-01
Remote Conference - Name
Set name for remote conference.
Remote Conference Group Setting –
20-34-02
Remote Conference - Password
Set password for remote conference.
Remote Conference Group Setting –
20-34-06
Remote Conference - Password Mode
Set whether users are prompted to enter a
password to access the conference. Normal will
prompt users to enter a password. If set to Skip
no password is required to enter a conference.
Remote Conference Group Setting – MCU
20-34-07
Mode for Remote Conference
Set the MCU video mode for remote
conference.
Setting this value for mode 1 or 2 determines
whether 84-27-22 or 84-27-23 is used.
Input Data
Must work within current system
dialing plan.
0 = Disable
1 = Enable
0 = Disable
1 = Enable
Maximum of 12 characters.
Maximum of 4 numbers.
0 = Normal
1 = Skip
0 = Disable
1 = Mode 1
2 = Mode 2
1081
Default
No Setting
0
1
Conferences
1 ~ 4 =
Conf 1 - Conf 4
Conferences
5 ~ 20 = blank
Conferences
1 ~ 4 = 1111
Conferences
5 ~ 20 = blank
0
0