NEC UNIVERGE SV9100 Features And Specifications page 1075

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Guide to Feature Programming

The items highlighted in gray are read only and cannot be changed.

Program Name/Description

ETU Setup – Number of Voice Channels

Read only program showing number of VoIP

resources available for voice calls.

This information can also be viewed by

pressing Feature+4 on an idle display terminal.

License Configuration for Each Package –

License Code

Assign VoIP Resource Licenses (5103) to

GCD-CP10 slot (1).

If applying more than 255 licenses to a slot, the

licenses must be applied across multiple

For example, assigning 256 VoIP resource

licenses (5103) to the CPU slot could be

assigned using different methods as long as the

total for the CPU slot is 256.

1. Index 1 has 128 of feature code 5103 and

index 2 also has 128 of feature code 5103 for a

total of 256.

2. Index 1 has 255 of feature code 5103 and

index 2 has 1 of feature code 5103 for a total of

Remote Conference Group Pilot Number

Enter the pilot number for remote conference.

IP Trunk Data Setup – P2P Mode (SIP Trunk)

Select whether or not peer-to-peer connection

method is used for the SIP Trunk.

IP Trunk Data Setup – Video Mode (SIP

Select whether or not the video mode is used

for the SIP Trunk.

This program is not supported for v 1.00 and

will be added in a future release.

IP Telephone Terminal Basic Data Setup –

Enable/Disable Video Mode for Standard SIP

1 ~ 255 Resource Licenses

Must work within current system

dialing plan.