NEC UNIVERGE SV9100 Features And Specifications page 1381

If calling from an SLT, DT300 (including virtual extensions) or a DT700:
1. Program 15-01-01 Extension name.
2. Extension number.
If calling from a trunk, (i.e. SIP trunk, ISDN, Analog C.O.):
1. Calling party name of incoming trunk. (Caller ID information).
2. Program13-04-02 abbreviated dial Name (with matching caller ID).
3. Calling party number.
For trunks, new Program 15-05-40 controls what is displayed and has the following options:
1. Both Name and Number.
2. Name only.
3. Number only.
4. None.
If calling from Voice Mail:
1. Program 45-01-02 Voice Mail master Name.
2. Program 45-01-09 Centralized Voice Mail Master name.
3. Program 15-01-01 Calling station information (Voicemail extension).
Conditions
Program 15-05-17 is no longer used.
Program 32-04-01 Door Phone Name is not supported.
Hold recall will not display calling name.
Transfer recall will not display calling name.
Alarm is not supported.
Call forward from trunk is not supported.
The system has the ability to receive DTMF information in SIP INFO
messages sent by Standard SIP Terminals. This allows the SIP Terminal to
initiate features during a ringing state such as Camp-On and Message
Waiting.
1381