NEC UNIVERGE SV9100 Features And Specifications page 1393

Program
Program Name/Description
Number
84-19-40 SIP Extension IP CODEC Information Basic
Setup – G.726 Jitter Buffer (min)
Define the minimum setting for the G.726 Jitter
Buffer.
84-19-41 SIP Extension IP CODEC Information Basic
Setup – G.726 Jitter Buffer (Average)
Define the average setting for the G.726 Jitter
Buffer.
84-19-42 SIP Extension IP CODEC Information Basic
Setup – G.726 Jitter Buffer (Max)
Define the maximum setting for the G.726 Jitter
Buffer.
SIP Extension Basic Information Setup:
Program
Program Name/Description
Number
SIP Extension Basic Information Setup –
84-20-01
Registrar/Proxy Port
Define SIP station Proxy Port.
SIP Extension Basic Information Setup –
84-20-02
Session Timer Value
Define the periodic refresh time that allows both
user agents and proxies to determine if the SIP
session is still active.
SIP Extension Basic Information Setup –
84-20-03
Minimum Session Timer Value
Define the minimum allowed value for the SIP
session timer.
SIP Extension Basic Information Setup –
84-20-04
Called Party Info
Define the SIP Extension presented Caller ID
information.
SIP Extension Basic Information Setup –
84-20-05
Expire Value of Invite
Define the time out response value for SIP
invite.
IPL Basic Setup – IP Address
84-26-01
Assign the IP address for each DSP on the
GPZ-IPLE.
IPL Basic Setup – RTP Port Number
84-26-02
Assign the RTP port number to be used for
each DSP on the GPZ-IPLE.
Only even numbered ports are supported.
Input Data
0 ~ 160ms
0 ~ 160ms
0 ~ 160ms
Input Data
1 ~ 65535
0 ~ 65535 seconds
0 ~ 65535 seconds
0 = Request URI
1 = To Header
0 ~ 256 seconds
xxx.xxx.xxx.xxx
0 ~ 65534
1393
Default
30
60
120
Default
5070
180
180
0
180
Slot 1 =
172.16.0.20
VoIP GW1 =
10020