NEC UNIVERGE SV9100 Features And Specifications page 1240

Program
Program Name/Description
Number
25-12-01 Alternate Trunk Group Routing for DISA
Define the trunk route selected when a DISA
caller dials the Alternate Trunk Access Code
assigned in Program 11-09-02. The route
selected is based on the DISA caller Class of
Service, which is in turn determined by the
password the caller dials. Program 14-06 is
used to set up the Trunk Group Routing.
34-03-01 Trunk Group Routing for E&M Tie Lines
Assign the Trunk Group Route chosen when a
user seizes a Tie Line and dials 9. Set Trunk
Group Routing in Program 14-06. If the system
has ARS, dialing 9 accesses ARS.
Operation
To place a call using Trunk Group Routing:
1. At the multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial 9.
3. Dial number.
- OR -
1. At the multiline terminal, press Trunk Group Routing key (Program 15-07 or SC 852:
 Also refer to the
2. Dial the number.
Call Appearance (CAP) Keys
Input Data
Trunk Group Routes: 1 ~ 100
Day/Night Mode = 1 ~ 8
Route Table Number = 0 ~ 100
(0 = No Setting)
Trunk Group Routes: 0 ~ 100
(0 = No Setting)
1240
Default
1
1
05).
*