NEC UNIVERGE SV9100 Features And Specifications page 1167

Program
Program Name/Description
Number
NetLink Communication Port Settings –
51-09-01
Primary Waiting Port
Set the communication port that the Primary
system uses to communicate with the
Secondary system.
NetLink Communication Port Settings –
51-09-02
Communication Waiting Port
Set the Port used to communicate between
nodes. It is always opened by all nodes.
NetLink Communication Port Settings –
51-09-03
Secondary Communication Port
Secondary system communicates with Primary
system at this port number. If 0 is specified,
temporary port is dynamically selected.
NetLink Communication Port Settings –
51-09-04
Primary Search Port
When Fail-Over occurred, each system
communicates with other system at this port
number.
If 0 is set, temporary port is selected
dynamically.
If 0 is not specified, the number and continuous
maximum 50 number is used.
(e.g. 5000 is specified 5001, 5002...5049 are
used).
NetLink Communication Port Settings –
51-09-05
Primary Detection Port
Enter port number to seek the Top Priority
Primary system.
If 0 is specified, temporary port is selected
dynamically.
NetLink Communication Port Settings –
51-09-06
Database Replication Communication
Listening Port
Set the port used to replicate database.
NetLink Communication Port Settings –
51-09-07
Database Replication Primary Detection
Port
Set the port used to replicate database.
If 0 is specified, temporary port is selected
dynamically.
Virtual Slot Setting – Number of Available
51-10-01
Virtual Slots
240 slots can be controlled in NetLink. This
command can check how many slots are
available.
NetLink System Information – System Name
51-11-01
For reference only.
Input Data
0 ~ 65535
0 ~ 65535
0 ~ 65535
0 ~ 65535
0 ~ 65535
0 ~ 65535
0 ~ 65535
240 slots can be controlled in
NetLink. This command can
check how many slots are
available.
For reference only.
1167
Default
58000
58001
0
0
0
58002
0
No Setting
No Setting