NEC UNIVERGE SV9100 Features And Specifications page 1346

Program
Program Name/Description
Number
22-15-07 VRS Delayed Message for Department
Group – Disconnect Time After the End of
VRS Delayed Message
For each Department Group, set the time the
system waits after playing the VRS message
before disconnecting the call. To prevent the
call from disconnecting, set this option to 0.
This program is also used for VRS Waiting
Message.
System Options for Transfer – Delayed Call
24-02-03
Forwarding Time
Set the time a telephone rings before the call
reroutes to the programmed destination.
VRS/DISA Line Basic Data Setup – DISA
25-01-02
User ID
Select whether or not the DISA User ID is to be
used.
25-02-01 DID/DISA VRS Message
For each Night Service mode, enter 1 at the
Talkie prompt if trunk should be automatically
answered by VRS and the message number
the caller should hear (1 ~ 101).
25-03-01 VRS/DISA Transfer Ring Group With
Incorrect Dialing
Set the destination that Automated Attendant
(OPA) calls ring if the OPA caller dials an
incorrect extension number. This also sets the
options for DISA calls. The system allows Ring
Groups or Disconnect.
Input Data
0 = No Disconnect
1 ~ 64800 seconds
0 ~ 64800 seconds
0 = Off
1 = On
0 = No Message
1 = VRS (01 ~ 100 VRS
Message Number)
2 = ACI (01 ~ 04 ACI Group
Number)
3 = Department Groups (01 ~ 64
Extension Group Number)
Ring Groups:
1 ~ 100
Trunk Ports:
001 ~ 400
Day/Night Mode:
1 ~ 8
0 = Disconnect
1 ~ 100 = Incoming Ring Group
101 = DSPDB-VM
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
104 = Speed Dial Bin (table
Program 25-15-01)
1346
Default
60
10
1
0
0