To Record A Vrs Message - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
Voice Announcement Service Option – Park
40-10-05
and Page Repeat Timer (VRS Msg Resend)
If a Park and Page is not picked up during this
time, the Paging announcement repeats.
Voice Announcement Service Option – Set
40-10-06
VRS Message for Private Call Refuse (VRS
Msg Private Call)
Assign the VRS Message number used as
Private Call Refuse. When Fixed message is
set, VRS message guidance is: Service
finished. Disconnect the line, please.
Voice Announcement Service Option – Set
40-10-07
VRS Message for Caller ID Refuse (VRS Msg
CID)
Assign the VRS Message number used as
Caller ID Refuse. When Fixed Message is set,
VRS message guidance is: Service finished.
Disconnect the line, please.
40-11-01 Preamble Message Assignment
Assign the VRS Message number used as the
Preamble Message for each trunk. When the
extension user answers the incoming call, the
assigned VRS message is sent to the outside
caller.
SV9100 InMail Group Mailbox Options –
47-03-02
Mailbox Number
The Group Mailbox Number is the same as the
Department Group master (pilot) number.
Select the Department Group master (pilot)
number associated with the Master Mailbox you
are programming.
Operation
VRS Messages

To record a VRS message:

1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 716.
3. Dial 7 ( ecord).
R
4. Dial the VRS message number you want to record (01~100).
Input Data
0 ~ 64800 seconds
0 ~ 101
(0 = No message) (101
= Fixed message)
0 ~ 101
(0 = No message) (101
= Fixed message)
0 ~ 100
(0 = No Service)
Digits (eight maximum, using
0 ~ 9)
No Setting
(entered by pressing Hold)
1351
Default
0
0
0
0
No Setting