NEC UNIVERGE SV9100 Features And Specifications page 1314

Program
Program Name/Description
Number
Incoming Call Trunk Setup – Incoming Type
22-02-01
Assign the incoming trunk type for each trunk.
There is one item for each Mode. When using
Trunk-to-Trunk Forwarding the trunk must be
set to 0.
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions (up to 48) to Ring Groups.
Calls ring extensions according to Ring Group
programming.
22-07-01 DIL Assignment
Assign the destination extension for each DIL
incoming trunk (001 ~ 400).
For this selection to work, set Program
22-02-01 to 4 = DIL.
22-08-01 DIL/IRG No Answer Destination
For Voice Mail Overflow, enter the Ring Group
that unanswered DILs to Voice Mail ring after
the DIL Call Waiting time (Program 22-01-04).
System Options for Transfer – MOH or
24-02-02
Ringback on Transferred Calls
Enable (0)/Disable (1) MOH on Transfer. If
enabled, a transferred caller hears Music on
Hold while their call rings the destination
extension. If disabled, a transferred caller hears
ringback while their call rings the destination
extension. For this option to work with voice
mail, the transferred call must be an
unscreened transfer.
System Options for Transfer – Delayed Call
24-02-03
Forwarding Time
Set the time a transferred call waits at an
extension forwarded to Voice Mail before
routing to the called extension mailbox.
Input Data
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
Maximum of eight digits.
Day/Night Modes (1 ~ 8):
Extension Number (maximum of
eight digits)
Pilot Number
0 (No Setting)
001 ~ 100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
103 = Centralized VM
0 = Hold Tone
1 = Ring Back Tone
0 ~ 64800 seconds
1314
Default
0
Extensions
101 ~ 108 (first
eight ports) ring
for incoming
Ring Group 1
calls. No other
extensions ring
for incoming
Ring Group 1
calls.
No Setting
1
0
10