NEC UNIVERGE SV9100 Features And Specifications page 1229

Program
Program Name/Description
Number
22-08-01 DIL/IRG No Answer Destination
Assign the DIL No Answer Ring Group where
an unanswered call should overflow.
System Options for Transfer – Busy
24-02-01
Transfer
Enable/Disable an extension user ability to
Transfer calls to busy extensions. If disabled,
calls transferred to busy extensions recall
immediately.
System Options for Transfer – MOH or
24-02-02
Ringback on Transferred Calls
Enable (0)/Disable (1) MOH on Transfer. If
enabled, a transferred caller hears Music on
Hold while their call rings the destination
extension. If disabled, a transferred caller hears
ringback while their call rings the destination
extension. For this option to work with voice
mail, the transferred call must be an
unscreened transfer.
System Options for Transfer – Delayed Call
24-02-03
Forwarding Time
If activated at an extension, Delayed Call
Forwarding occurs after this time. This also sets
the time a Transferred call waits at an extension
forwarded to Voice Mail before routing to the
called extension mailbox.
System Options for Transfer – Transfer
24-02-04
Recall Time
Set the Transfer Recall Time. An unanswered
transferred call recalls to the extension that
initially transferred it after this time.
System Options for Transfer – Message Wait
24-02-05
Ring Interval Time
For Single Line Telephones (SLTs) without
message waiting lamps, this is the time
between intermittent ringing. If this value is 0,
the system rings once.
A release transfer to a busy Department Group
only follows this time if the Department Group is set
to 0 = No Queue in Program 16-01-10, if set to 1, 2
or 3 it follows the time in Program 24-02-04.
Input Data
0 (No Setting)
001 ~ 100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or InMail)
103 (Centralized VM)
0 = Disable (No)
1 = Enable (Yes)
0 = Hold Tone
1 = Ring Back Tone
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 64800 seconds
1229
Default
1
1
0
10
30
30