To undefine a key, enter 00.
To change a 3-digit programmable key:
1.
Press Speaker.
2.
Dial 852 for 3-digit codes.
3.
Press the key you want to program.
4.
Enter the 3-digit key function and any additional information needed for the key.
For available functions codes, refer to Program 15-07 in the UNIVERGE SV9100 Programing
Manual.
To undefine a key, enter 000.
When a key is programmed using service code 852, that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 +
by dialing 851 + 48.
To check the function of a programmable key:
1.
Press the Help key.
2.
Press the programmable key.
The programmed function displays.
04 must be undefined by dialing 000 before it can be programmed as a Voice Over key
*
1001