NEC UNIVERGE SV9100 Features And Specifications page 1051

Guide to Feature Programming
Program
Program Name/Description
Number
11-10-46 Service Code Setup (for System
Administrator) – Watch Message Setting
Service Code setting for Watching message
recording to VRS.
11-10-47 Service Code Setup (for System
Administrator) – Warning Message Setting
Service Code setting for Warning message
recording to VRS.
11-10-48 Service Code Setup (for System
Administrator) – Auto Dial for Security
Sensor
Service Code setting for destination number
when Warning mode detected.
11-10-49 Service Code Setup (for System
Administrator) – Auto Dial for Remote
Inspection
Service Code setting for destination number
when remote inspection detects no answer.
Service Code Setup (for Service Access) –
11-12-62
Security Sensor Reset
Service Code setting for cancel Warning
message sending and emergency call.
Service Code Setup (for Service Access) –
11-12-63
Watch Mode Start
Service Code (SC) setting for on/off watch
mode. SC+1;Watch mode start SC+0; Watch
mode end.
Input Data
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
1051
Default
714
719
748
749
837
817