NEC UNIVERGE SV9100 Features And Specifications page 1140


Traffic Reports
Guide to Feature Programming
Program
Program Name/Description
Number
GCD-CP10 Network Setup – IP Address
10-12-01
Assign the IP Address.
LAN Setup for External Equipment – TCP
10-20-01
Port
Define the TCP port (0 ~ 65535) when
communicating to the SMDR (type 5).
LAN Setup for External Equipment – Keep
10-20-03
Alive Time
Define the keep alive time for communicating to
external equipment.
Basic Trunk Data Setup – SMDR Printout
14-01-06
Have the system print or Not print the trunk you
are programming in the SMDR printout. Refer
to Programs 35-01 and 35-02 for SMDR
printout options.
14-04-01 Behind PBX Setup
For ANI/DNIS, the following additional setting is
recommended: Behind PBX = 0 (Stand Alone).
Basic Extension Data Setup – SMDR
15-01-03
Printout
For each extension, enter 1 if extension calls
should print on the SMDR report. Enter 0 if
extension calls should not print on the SMDR
report.
Input Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0 ~ 65535
1 ~ 255 seconds
0 = No Print Out
1 = Prints Out
0 = Stand Alone (Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
0 = Do not print on SMDR report
1 = Include on SMDR report
1140
Default
192.168.0.10
External Device
1 (CTI Server) =
0
External Device
2 ( MIS) = 4000
External Device
5 (SMDR
Output) = 0
External Device
6 (DIM Output) =
0
External Device
11 (O&M Server)
= 8010
External Device
12 (Traffic
Report Output) =
0
External Device
13 (Room Data
Output for Hotel
Service) = 0
External Device
14 (IP-DECT
Directory
Access) = 0
30
0
0
1