NEC UNIVERGE SV9100 Features And Specifications page 1235

Program
Program Name/Description
Number
Trunk Group Routing – Priority Order
14-06-01
Number
Set the priority order number 1 ~ 4.
Trunk Access Map Setup – Trunk Port
14-07-01
Number
Assign trunks to Access Maps.
15-06-01 Trunk Access Map for Extensions
Assign Access Maps to extensions.
15-07-01 Programmable Function Keys
Assign function keys for trunk group access
(code *02 + group) or Call Appearance (CAP)
Keys (code *08 + CAP Key orbit 0001 ~ 9999
(or 0000 for auto assign).
System Options for Multiline Telephones –
20-02-02
Trunk Group Access Key Operating Mode
Set the operating mode of the extension trunk
group keys.
Timer Class for Extension – Day/Night Mode
20-29-01
1~8, Class Number
Assign the timer class to each extension. There
are 16 Classes that can be assigned. You make
eight entries for this Program, one for each
Night Service Mode. This entry includes virtual
extension numbers.
Timer Class Timer Assignment – Intercom
20-31-04
Interdigits Time (Intercom I/D Timer)
When placing Intercom calls, extension users
must dial each digit in this time.
System Options for Outgoing Calls –
21-01-02
Intercom Interdigit Time
When placing Intercom calls, extension users
must dial each digit in this time.
Input Data
0 = Not Specify
1 ~ 100: (Trunk Group Number)
101 ~ 150: (100 + Networking
System Number)
1001 ~ 1100: (1000 + Route
Table Number)
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
Trunk Access Maps: 1 ~ 400
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0 ~ 15
0 = Not assigned
0 ~ 64800 seconds
0 ~ 64800 seconds
1235
Default
Route 1, Order
Number 1 = 1
(Trunk Group 1)
Order Numbers
2, 3, 4 = 0 (Not
Specified)
All Other Routes
(2 ~ 100) and
Order Numbers
(1 ~ 4) = 0 (Not
Specified).
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
1
0
0
10
10