NEC UNIVERGE SV9100 Features And Specifications page 1281

Program
Program Name/Description
Number
44-02-01 Dial Analysis Table for ARS/F-Route Access
– Dial
Set the dial digits to be analyzed by the system
for ARS routing.
44-02-02 Dial Analysis Table for ARS/F-Route Access
– Service Type
Select the Service Type.
44-02-03 Dial Analysis Table for ARS/F-Route Access
– Additional Data
Enter the additional data required for the
service type selected in Program 44-02-02,
either the number of digits to be deleted or the
table number to be used.
44-02-04 Dial Analysis Table for ARS/F-Route Access
– Dial Tone Simulation
If Enabled (1), this option sends dial tone to the
calling party after the routing is determined.
This may be required if the central office at the
destination does not send dial tone.
Dial Analysis Extension Table – Dial
44-03-01
Set the Dial digits (24 digits maximum) 1 ~ 9, 0
#
* , @) to be used for the Dial Extension
Analysis Table. When Program 44-02-02 is set
to 3, this program sets the dial extension
analysis table. These tables are used when the
analyzed digits must be more than eight digits.
To enter a wild card/don't care digit, press Line
Key 1 to enter an @ symbol.
Dial Analysis Extension Table – ARS/
44-03-02
F-Route Select Table Number
When dialed digits match the setting in
Program 44-03-01, select the ARS/R-Route
table number (0 ~ 500) to be used for the Dial
Extension Analysis Table.
Dial Analysis Extension Table – ARS/
44-03-03
F-Route Select Table Number
If the received digits are not identified in tables
1 ~ 250, the F-Route selection table number (0
~ 500) defined in table 251 is used.
Input Data
Maximum of eight digits
(Use line key 1 for a 'Don't Care'
digit, @)
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0 ~ 4
(0 = No Setting)
0 = Off
1 = On
Maximum of 24 digits
Digits = 1 ~ 9, 0, *, #, @
(Press Line Key 1 for wild
character @)
0 ~ 500
(ARS/F-Route Table Number)
With Program 44-01 set to 0,
Program 44-05 is checked.
With Program 44-01 set to 1,
Program 44-04 is checked.
0 ~ 500
(ARS/F-Route Table Number)
With Program 44-01 set to 0,
Program 44-05 is checked.
With Program 44-01 set to 1,
Program 44-04 is checked.
1281
Default
No Setting
0
0
0
No Setting
0
0