NEC UNIVERGE SV9100 Features And Specifications page 1225

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

 When a multiline terminal user is on a call, they must press transfer to transfer a call off-site

with a DSS key.

The following features require certain tones be changed in Program 80-01-02. Refer to the

table in the

Call Holding

Busy Greeting

Call Screening

Await Answer Transfer

A Trunk-to-Trunk transfer can be established by the following operation:

1. While talking to an outside party, press Hold.

2. Access a second outside line and dial the desired number.

3. Press Transfer to complete the Trunk-to-Trunk transfer.

When the second call is to be transferred to another station (Not Trunk-to-Trunk), the user

should press Hold at step 3, then dial the desired station and press Transfer to complete the

If station A calls Station B, and station A puts station B on hold and then calls station C,

station C cannot transfer the call.

When transfer recall is disabled, unanswered transferred calls to a Virtual Extension or

Virtual Loopback port will always recall once the transfer recall timer expires.

Default Settings

System Availability

All Multiline Terminals

Required Component(s)

Related Features

Call Forwarding

Call Waiting/Camp-On

feature programming section for settings: