Using The Test/Print Menu - Ricoh AFICIO MP01 Operating Instructions Manual

USING THE TEST/PRINT MENU

To access the Test/Print menu, press the [
the [ ] key or the [ ] key until "Test/Print" diaplays.
The Test/Print menu contains the following selections:
System Reset
PCL Font List
System Config
Note: This PS font list menu displays only when the PostScript option is
installed.
System Reset
From the Test/Print menu, press the [
[ ] key until "System Reset" displays on the Control Panel.
When you press the [
Panel, the printer resets to the settings you saved most recently. The system
resets and goes through initialization sequence, including resetting DRAM memory.
Therefore, all downloaded fonts are lost.
PCL Font List
From the Host Interface menu, press the [
the [ ] key until "PCL Font List" displays on the Control Panel.
When you press the [
Panel, a page prints listing the resident PCL fonts, and permanently downloaded
fonts.
] key to enter Menu mode. Press
Error Log
PS Font List
] key and press the [ ] key or the
] key while "System Reset" displays on the Control
] key while "PCL Font List" displays on the Control
USING THE CONTROL PANEL
] key and press the [ ] key or
2-25