Ricoh AFICIO MP01 Operating Instructions Manual page 88

USING THE OPTIONS
Raise the spring-loaded pressure
4
bar and lock it into position at the
top of the Envelope Feeder.
Move the envelope guides toward the edges of the Envelope Feeder.
5
Prepare a stack of up to 100 envelopes by fanning them and evening up the
6
edges to make sure that none of the envelope flaps will open. Place the
stack into the Envelope Feeder, face up with the top of the envelopes facing
the rear of the printer.
Note: Make sure the end of the stack going into the feeder is angled, so
that the bottom of the stack extends forward (into the feeder) further
than the top of the stack. The end of the stack should not be perfectly
flat.
Position the guides against the
7
stack of envelopes.
4-12