This section lists the messages that display on the printer Control Panel, and
the actions you can take to resolve the problems described.
Table 5-5 lists the Control Panel messages that display when you start up the
printer.
Table 5-5. Startup status messages
Message
Self Test
Initializing
Warming Up
Ready
Energy Saver Mode
CONTROL PANEL MESSAGES
Description
The diagnostic procedure is running.
The printer is initializing.
The printer, or the finisher, is warming
up.
The printer is ready for data input.
The printer is in Energy saver mode.
TROUBLESHOOTING
Action
This message is informational
only. No action is required.
This informational message
displays while the printer is
starting up. No action is
required.
This message is informational
only. No action is required.
Wait until "Ready" displays on
the printer Control Panel before
you send data to the printer.
This message is informational
only. No action is required.
Wait until "Ready" displays on
the printer Control Panel to send
data to the printer.
This message is informational
only. No action is required.
The printer exits Energy saver
mode when you press a key, or
when you send a print job.
5-23