Table of Contents
Advertisement
Using the LCT
Follow these steps to print using the LCT.
Using the Print menu of your application, select the LCT as the input tray.
1
Open the LCT door. When the LCT
2
runs out of paper, the paper tray
descends and allows you to load
paper. Do not attempt to open the
door while the tray is descending.
The red indicator on the tray
loading button blinks while the tray
is descending or rising. The light
stays on when the tray is down and
the door can be safely opened.
If the LCT is not empty, you can
3
lower the paper tray by pressing
the tray loading button located on
the left side of the unit.
Place up to 1,500 sheets in the
4
LCT face-up.
Close the LCT door. The paper tray rises and positions the top of the stack
5
against the input rollers. When the tray is ready for printing, the indicator
light on the tray loading button goes off.
USING THE OPTIONS
4-15
Advertisement
Table of Contents
Troubleshooting
