Ricoh AFICIO MP01 Operating Instructions Manual page 123

Table 5-3. Print quality problems (continued)
Problem Cause
Blank (White) Network configuration may generate
pages a blank page as a print job separate.
The machine is feeding two or more
pages at once.
The entire print The printer cable or network cable is
job does not connected incorrectly.
print (No printing) Software configuration error.
Machine configuration error.
Repeating The inside of the machine is dirty. If a
patterns roller is dirty with toner, there may
(Defects at occur repetitive defects on the page.
repeating The PCU is damaged.
intervals)
The Fusing Unit is damaged.
Vertical lines The PCU is damaged.
Fusing Unit is damaged.
Easy to remove The lever on the Fusing Unit is in the
toner from the lower position to print envelopes.
printout.(Un-
fused image)
TROUBLESHOOTING
Action
Contact the network system
administrator.
Check that the paper is set in the paper
tray correctly.
Refer to the "Loading Paper" for how to
set paper.
Check that the parallel cable and
network cable are secure.
Check the configuration to make sure
that it is set to print the entire job.
Check that the printer is in the On-line
mode and check for error messages on
the Control Panel.
Set Parallel and NIC Personality to Auto
Sense.
Clean the inside of the machine. (mainly
rollers)
Refer to the "Cleaning" in this manual.
Check the PCU. Replace the PCU if
damaged.
Check the Fusing Unit. Replace the
Fusing Unit if damaged.
Check the PCU.
Replace the PCU if damaged.
Check the Fusing Unit. Replace the
Fusing Unit if damaged.
Turn the lever to the upper position
(normal paper printing position)
5-21