Ricoh AFICIO MP01 Operating Instructions Manual page 89

Lower the pressure bar so that it
8
rests on top of the stack of
envelopes.
Open the Front Cover.
9
Pull the lever down to the left so
j
you can see the * mark under it
as shown. Then,close the Front
Cover.
Important: Be sure to return the
lever to its original position after
finishing the envelope printing job.
Open the External Tray, or specify
k
the output destination as Shift Tray
Face-up.
Note:The Shift Tray is available
only when the optional Finisher is
installed.
To output to the Shift Tray, you must select Shift Tray Face-up as the output
l
destination,using your application, your printer driver, or Control Panel.
USING THE OPTIONS
4-13