Printer; Electrical And Hardware Specifications - Ricoh AFICIO MP01 Operating Instructions Manual

SPECIFICATIONS
This section contains the electrical and hardware specifications for your printer,
including information on the hardware and software options. It also provides
information on the output capabilities of the printer.

Electrical and Hardware Specifications

This section contains the electrical and hardware specifications for your printer,
including information on optional equipment. Table 6-1 lists the basic printer
information and specifications.
Note: All specifications are subject to change without notice.
Table 6-1. Basic printer information
Component
Resolution
Gray scale
Paper weight
Paper capacity
Printing speed
Toner replacement
Power source
Power consumption
Noise emissions
6-2
600 dots per inch (dpi) standard
400 dpi available when the Tiff or the PostScript
300 dpi simulated by doubling pixel size at 600 dpi resolution
200 dpi simulated by doubling pixel size at 400 dpi resolution
Up to 256 levels
Tray 1 and 2 - 60 to 90 g/m
By-pass tray - 60 to 157 g/m
Trays 1 and 2 - 250 sheets or less than 27 mm (1.04")
By-pass tray - 100 sheets or less than 10 mm (0.4")
25 pages per minute (ppm) (Letter or A4)
Cartridge exchange
120V, 60Hz, more than 9.0A (U.S. and Canada)
220V, 50Hz, more than 4.5A (Europe)
Energy saver mode - less than 45 watts (W)
Maximum - 950 W
Printer: Stand-by, 40 dB(A); printing, 64 dB(A)
Printer with all accessories: Stand-by, 40 dB(A); printing - 68 dB(A)
The measurements are made according to ISO 9296 at the operator
position.
Specification
option is installed
®
(16 to 24 lb)
2
(16 to 42 lb)
2

PRINTER