Table of Contents
Advertisement
After you load paper, you can test the machine using the Test menu available
from the Control Panel.
Follow these steps to access the Test menu:
Make sure the [
Press the [
] key so the [
the Menu mode.
Press the [ ] key until "T est/Print" appears on the display, then press the [
] key
Press the [ ] key until "System Config" appears on the display, then press
the [
] key to print the Configuration Page, listing information about
the machine system and configuration.
After printing the page, the printer will return to the On Line mode and display
"Ready".
Check the Configuration Page for your settings.
Refer to the "Using the Control Panel" chapter in this manual for further
information on configuring the machine and testing the printing capabilities.
] and [
] indicator lights are lit.
] indicator turns off. This indicates you are in
SETTING UP
TESTING
1-11
Advertisement
Table of Contents
Troubleshooting
